AirBoost-300
| The AirBoost-300 is a pressure booster
pump which is air-driven and will double air or gas input pressures.
Output pressure is adjustable within the 50 to 300 psi range.
Installation is fast with standard NPT pipe threads to inlet
and outlet air connections. Operation is possible in wet, dirty,
or dusty environments because no electricity is needed. AirBoost
has low maintenance and high durability based on stainless steel
and aluminum construction. Big in performance, the AirBoost is
available in two models. |
 |
| Model
# |
Features
Included |
| 300-002 |
Compressor pump, 300psi Max safety valve, air reservoir,
air connection from reservoir to compressor, foot mounting
brackets, and FRL mounting plates. |
| 300-003 |
All items of Model 300-002 plus: inlet on-off valve, inlet
FRL(10-150 psi) with gauge, outlet RL (50-300 psi) with gauge,
outlet on-off valve, exhaust mufflers, and air connections
between FRLs and AirBoost unit. |
|
 |
Air Flow Characteristics for AirBoost-300 |
When planning an air system, it is important to know if the
air booster has enough pressure and volume for the application.
The amount of output pressure and volume from the AirBoost-300
is dependent on the pressure and volume of air flowing into
the air booster. A larger air supply line to the booster input
will produce better performance than a small line. Generally
it is more efficient to use as much input pressure as possible,
and then regulate the output of the booster to meet your application
needs.
This graph illustrates some typical flow volumes and pressures
that can be expected with the AirBoost-300. Each curved line
in the graph represents performance at specific input pressures
which are shown directly above the line. |
|
|
|
